Magnetic Separator works

Pulp by the magnetic field at the entrance to the mine to enter the sorting room, then into the field and through the gap tooth plate, non-magnetic mineral particles are not attracted tooth plate, falling into the tailings tank, weakly magnetic minerals were adsorbed a high magnetic field strength around the sharp teeth of the ring with the transfer of approximately 60 degrees, where the magnetic force is low, high-pressure water tank into the concentrate between the concentrate and the tailings can also be connected to the product of the magnetic type.Magnetic Separator There are four magnetic separator to mine, can each independently sorting process.
After the ore slurry tank flows into the tank, under the action of water sprinkler pipes to the mine, mineral particles entering the tank was loose state to mine. The role of magnetic fields in magnetic mineral particles occur together and form a magnetic "magnetic group" or "magnetic chain", "magnetic group" or "magnetic chain" by the magnetic force in the pulp, the pole movement, and is adsorbed on the cylinder .
Since the polarity of the magnetic poles along the rotational Flotation Machine direction of the cylinder are alternately arranged, and the stationary at work, "magnetic group" or "flux" with the cylinder during rotation, the magnetic poles generated alternating magnetic stir phenomenon is mixed In the "magnetic group" or "magnetic chain" gangue minerals and other non-magnetic flip fall down, and eventually being sucked in the cylinder surface "magnetic group" or "magnetic Lotus" is the concentrate. Go to concentrate magnetic system with the edge of a magnetic cylinder weakest in unloading ore rinse under water pipes gushing water is discharged into the concentrate tank role. Non-magnetic or weakly magnetic minerals are left with the pulp in the pulp discharged outside the tank, that is, the tailings.