1 separator must be fully checked before work is properly operating mechanism ministries will wipe rocker rail with a fine cotton oil grades oiling a clean and press.
2 After the separator locking arm and TengFei Magnetic Separator headstock ministries in order to operate.
3 There shall be no obstructions within the separator arm swing range.
4 before opening splintered mechanical separator, magnetic separation machine table, the workpiece, fixture, cutting tools, must find positive fastening.
5. Separator correct selection of spindle speed, feed rate, should not overload use.
6 beyond the bench drilling, the workpiece must be stable.
7. Magnetic mechanical machine in operation and automatic feed, and not to change the fastening exchange rate, if the spindle speed can only be stopped completely in order to proceed.
8. Separator handling cutting tools and measuring the workpiece must be carried down, not allowed to direct the work by hand drilling, Spiral Chute Separator shall not wear gloves.
9. Separator work found abnormal sound, you must immediately stop checking troubleshooting.
没有评论:
发表评论