Aluminum aerated concrete mixer equipment

      Leaves high-speed operation, the aluminum powder mixed with water, for the ingredients ready.
  JD spreader aerated concrete equipment and molds
      Spreader and mold is the production of aerated concrete must be configured accessory equipment,Pouring machine & Pouring mixer and can be recycled and put into use. Two kinds of automatic and general spreader points, and double-beam dual carriageway supporting hook for stripping, lifting body and so on.
Aerated concrete equipment mold base plate:
      Choose sides welded square steel, capped with 8mm thick steel to strengthen steel, to prevent deformation damage to the body.
      Mold box: min movable and overall two. Double hollow side effects from the heat inside the 10mm thick steel plate welded chosen to increase its rigidity and prevent deformation, extend the life cycle. Specifications (before cutting the rough size): 4.15m × 1.24m × 0.65m
      Steam curing car: use square steel welded base plate and mold,TengFei Spiral conveyor the mold frame supporting a combination of smooth and lightweight operation. Gauge: 600mm
Other equipment aerated concrete equipment
      (1) lime, cement measuring tank
      (2) slurry metering tank
      (3) screw conveyor, and other equipment and technology supporting the production.